Hello!

Thanks for stopping by the Twisted Workshop. In the Blog section, You can find pictures, notes and videos about my latest projects. I will also talk about the tools, hardware and techniques I use to build and restore.

 

Wood Picture Frame Using Half Lap Joints

Wood Picture Frame Using Half Lap Joints

This 8x10 cherry wood picture frame is a great woodworking project for when you don't have much time to spend in the workshop. Only basic woodworking tools are needed to complete this project! Dimensions 2 sides measure 1 and 3/8" wide x 5/8" thick x 12" long. 2 sides measure 1 and 3/8" wide x 5/8" thick x 14" long. All sides require a 1 and 3/8" wide dado starting 2 and 1/8" from each end. The dado needs to be half the thickness of the board. Cut 10 degree angles on the end of each board. The rabbet to accept the glass, and backing board should be 1/4" by 3/8" deep. The glass and backing board should be 8 and 1/4" x 10 and 1/4".

Making a Shadow Box With Spline Miters

Making a Shadow Box With Spline Miters

0